mcpro35mm works through the standard Android camera interface. The interface is the same on all phones, but every manufacturer implements it in its own way. One camera hides the telephoto lens behind the main module and shoots with it only when asked in a special way. Another can do a thirty-second shutter speed but reports one second. That is why the app has accumulated rules for specific models: which camera to actually open, which photo sizes to offer beyond what the phone reports itself, and what to pass to the firmware to turn on the right mode.
This page collects what we try to do on specific models. It is not a list of guarantees. We cannot test every device: some of the rules were tested on phones we had, the rest were made based on documentation, user e-mails and bug reports. A rule may have worked on one firmware version and stopped working on the next. If something described here does not work on your model, write to us: info@mcpro24fps.com.
A few terms used below.
- "Camera JPEG" and "in-app RAW development". In a camera JPEG the image is processed by the phone's camera. With in-app RAW development the app takes RAW from the camera and itself makes a JPEG, Ultra HDR, HEIC or AVIF from it. Many of the rules below apply only on one of these paths.
- "Beyond what is reported". The phone gives the app a list of photo sizes. This list is often incomplete: the camera can take a larger frame but does not say so. We add such sizes manually, per model. They apply to the camera JPEG; in formats with RAW the photo size is set by the RAW itself.
- "Vendor camera mode". Many manufacturers have hidden camera operating modes. We turn them on with a number chosen for the model. In photo they are used only in the camera JPEG and in JPEG + DNG.
- "Vendor settings". Parameters that are not part of the standard interface but are understood by the firmware of a particular brand. If the firmware has removed such a parameter, the app remembers this and does not touch it again.
- "Actual camera". The phone shows one camera, but there are several modules inside it. Sometimes we open not the camera you selected but a hidden module behind it: that is the only way to make the right lens take the photo and to get RAW from that very lens.
How the app recognizes a phone. First by manufacturer, then by model name. Rules "for all Sony" or "for all Samsung" apply to any phone of the brand, even one that is not in our lists. Rules for a model apply only to that model.
General rules that do not depend on the brand
- RAW. Formats with RAW are available only on cameras that deliver RAW. On a camera without RAW the format temporarily becomes JPEG; your choice is not reset.
- In-app RAW development. Ultra HDR, the app's own JPEG, HEIC and AVIF are available on phones with OpenGL ES 3.1 graphics. Without it these formats shoot a plain DNG.
- HEIC and AVIF. The format item is there only if the phone has a hardware HEVC or AV1 encoder. HDR versions appear if the encoder can do 10-bit: the app checks this with a test frame at startup. A format saved in the settings from another phone is shot, without the required encoder, as the app's own JPEG or Ultra HDR.
- HDR viewfinder. In HDR formats the preview is shown in HDR if the phone's screen declares HDR10 or HDR10+. Otherwise the preview is normal.
- Flash. The set of modes is built from what the camera declares: "Auto", "On", "Red-eye", "External" (Android 9 and newer), "Screen" on a front camera without a flashlight, "Flashlight". The brightness wheel exists only on Android 15 and newer and only where the camera gives more than one level.
- Shutter speed. The top of the manual shutter speed range is what the camera declares. Only Sony and Samsung shoot longer; see their entries.
- Stabilization. In photo only optical: "Off" and "Optical".
- Zoom. Plain DNG has no zoom: RAW is not cropped. With in-app RAW development the zoom is cropped by the app itself, and the DNG stays full.
- Cameras with several modules. If an actual camera is opened behind the selected one, the photo and RAW are taken from its module, and so are the DNG parameters.
- "Face focus". The row is there if the camera can detect faces and has continuous autofocus.
- The depth of field under the focus distance is shown only if the camera reports the distance in real units.
- Burst and "Frame stacking". The burst length depends on the phone's free memory at the moment of pressing. "Frame stacking" needs OpenGL ES 3.1 graphics and spare memory; if there is not enough, a single frame is taken.
- On Qualcomm, sharpness and multi-frame noise reduction are controlled by Qualcomm vendor parameters, and Qualcomm HDR modes are forcibly turned off.
Brands on this page
An entry is one model or a family of models with the same behaviour; most brands also have a common entry "for all". Models are counted as mentioned in the entries.
| Brand | Entries | Models |
|---|---|---|
| Sony Xperia | 9 | 22 |
| Samsung Galaxy | 12 | 50 |
| Xiaomi, POCO, Redmi, Black Shark | 12 | 42 |
| OnePlus, OPPO, realme | 12 | 24 |
| Huawei, Honor | 8 | 29 |
| Google Pixel | 8 | 25 |
| LG | 3 | 11 |
| vivo | 4 | 9 |
| ASUS | 3 | 5 |
| Motorola | 2 | 6 |
| Nubia, ZTE | 3 | 7 |
| Sharp, Leica, Meizu, HTC | 4 | 6 |
