The largest brand by number of models and the most varied in its rules. Xiaomi often releases the same hardware under different names: the POCO F3 is the Redmi K40, and they share the same rules. On stock MIUI or HyperOS firmware the app additionally parses the firmware version and uses it to turn on the Mi 10, Mi 11 and Xiaomi 12 family rules even on models that are not in the list by name (in that case, in the Settings menu, which opens with the gear button, "(stock)" appears in the bottom line with the device information). Black Shark is treated as a separate manufacturer; the rules "for all Xiaomi" do not apply to it.
All Xiaomi
- Noise reduction and sharpness. The strength of noise reduction, sharpening and vignetting correction is set in levels through the standard strength parameters. Multi-frame noise reduction on Qualcomm is turned on by a Xiaomi vendor parameter, on MediaTek three-dimensional noise reduction by a MediaTek vendor parameter.
- Stabilization. On Qualcomm digital stabilization is switched by a Qualcomm vendor parameter, on MediaTek by a MediaTek vendor parameter.
- Frame rates on MediaTek. 120 and 240 fps are turned on by the MediaTek vendor slow-motion mode, 30…60 fps by the high frame rate mode.
- 10-bit. HEVC with the Main10 profile if available, otherwise Main10 HDR10 (Android 12 and newer). If the camera has not set a profile, the file is tagged BT.2020, in HDR mode with ST2084.
- HDR on MediaTek. Turned on by a MediaTek vendor parameter; on HyperOS 3 (Android 16) one of the parameters has been removed by the firmware and is not set.
- Session. For many models the vendor camera mode is chosen by model and by whether stabilization, 10-bit or a frame rate above 30 is on. In RAW vendor modes are not used.
- Curve. On Qualcomm up to Android 13 the number of tone curve points is raised to 256.
- The vendor recording control parameter is passed to all Xiaomi phones if the firmware knows it.
POCO F1, Mi 5s, Mi 8
- POCO F1: 10-bit worked up to Android 9; with the update to Android 10 the phone lost it. Camera 5 is hidden.
- Mi 5s: continuous autofocus mode for video is not offered.
- Mi 8: 60 fps on the main camera up to 3840×2160, at 31…60 fps a vendor camera mode. Camera 5 is hidden.
Mi 9, Mi 9 Pro, Mi 9T, Mi 9T Pro, Redmi K20 Pro, Mi 9 Lite
- Noise reduction. Multi-frame noise reduction per model: a Xiaomi vendor parameter with a fallback parameter, on Qualcomm also the general Qualcomm parameter.
- Session. On the Mi 9T with stabilization, a vendor camera mode.
- Frame rates. 60 fps on the main camera: 1920×1080, 2688×1512, 3840×2160, 4000×2250, on the Mi 9 also 4000×3000 without GPU, the same on camera 21. 48 and 50: plus 4000×3000 and 5120×2880 without GPU. 24 fps 5120×2880 without GPU on cameras 0, 20, 21. 10-bit limit 240 at 5120×2880.
- 10-bit. Mi 9 on the whitelist; Mi 9T only up to Android 9.
- Stabilization on MediaTek through a vendor parameter (Mi 9 with MediaTek).
Mi 10, Mi 10 Pro, Mi 10T, Mi 10T Pro, Mi 10 Ultra, Mi 10 Lite
- Mi 10 family (by model name or by firmware version): HDR item in the menu (off / HDR10), saved per camera; with HDR10 the preview curve and LUT are built as PQ; changing the curve preset restarts the preview; vendor camera mode for HDR10 and for stabilization.
- Session. Mi 10T Pro: at 120 fps and with stabilization up to 60 fps, model-specific vendor modes.
- Zoom. Camera 9 from 0.5× to 15×, buttons 0.5×, 1×, 1.5×, 2×, 5×.
- Noise reduction. Multi-frame noise reduction per model, as on the Mi 9.
- Frame rates. Mi 10 / 10T: 60 fps up to 4208×3120, without GPU also the square 4512×4512 and 4344×4344; 48 and 50 also 6016×4512 and 6016×3384 without GPU; 10-bit limit 120 at 6016×4512. Mi 10 Pro / 10T Pro: 60 fps on the main camera 24 sizes up to 6016×4512, cameras 2…4 have their own; 120 fps 3840×2160 without GPU; 10-bit limit 120 at 6016×4512. Mi 10 Ultra: 60 fps up to 4000×3000, 10-bit limit 240 at 5184×3880. The Mi 10 Lite has no table of its own.
- Curve. After the preview is restarted with a curve preset, the camera is switched to fast tonemapping mode: otherwise the curve was lost on the Mi 10 and Mi 11.
Mi 11, Mi 11 Pro, Mi 11 Ultra, Mi 11X, Mi 11 Lite, Mi 11T, Mi 11T Pro, 11 Lite 5G NE, Civi 1S
- Mi 11 family (by model name or by firmware version; on stock firmware the POCO F3, Redmi K40 and Redmi Note 11 Pro also fall here): everything the Mi 10 family has, plus the "MFNR" noise reduction mode in the list and its own set of vendor camera modes: a separate one for 10-bit with HDR, for stabilization, for 10-bit without stabilization and for frame rates above 30. 12-bit mode is turned off at the request of users.
- HDR10 on Qualcomm is turned on by a Qualcomm vendor parameter: one level with HDR, another without.
- Frame rates. Mi 11 / Pro / Ultra: 60 fps on the main camera up to 4080×3072, without GPU up to 6016×3384; 48 and 50 also 6016×4512 without GPU; 24 fps the 8K series on the main camera, on the Pro and Ultra also on cameras 2 and 3; 10-bit limit 240 at 7680×4320. Mi 11T Pro: 60 up to 4000×3000, 48 and 50 also 6016×4512, 24 up to 8K, 10-bit limit 240 at 8K. Mi 11 Lite: 60 up to 3840×2160, 10-bit limit 240 at 8K. Mi 11X: 60 up to 4000×3000, 10-bit limit 60 at 4000×3000. Mi 11T: 60 up to 3840×2160. 11 Lite 5G NE and Civi 1S: 60 up to 3840×2160, 10-bit limit 240 at 3840×2160.
- Zoom. On the Mi 11, camera 4: minimum, 1×, 1.5×, 2×, 5×. Cameras 4 and 5 are not considered duplicates.
POCO F2 Pro, Redmi K30 Pro, POCO F3, Redmi K40, Redmi K40 Pro
- POCO F2 Pro / K30 Pro: 60 fps up to 4208×3120 and 4624×3472 on the main camera, on camera 2 without 4624; 10-bit limit 60 at 4624×3472.
- POCO F3 / K40 / K40 Pro: 60 fps up to 3840×2160; 30 fps the 8K series (7680×4320, 6016×4512, 5792×4344, 5760×4320); 10-bit limit 60 at 7680×4320. On stock firmware they get the Mi 11 family rules.
POCO X3 NFC, POCO X3 Pro, POCO F4, POCO F5 Pro, POCO X5 Pro, POCO M4 Pro 5G
- POCO X3: for AVC the Qualcomm encoder is tried first. 60 fps up to 2688×1512 and without GPU up to 2608×1960 on the main camera, on camera 1 up to 1920×1440; 10-bit limit 60 at 4000×3000.
- POCO X3 Pro: 60 fps up to 4000×3000 on the main camera, camera 1 up to 2592×1940, cameras 2…4 cannot do 60; 10-bit limit 60 at 4000×3000.
- POCO F4: 60 up to 3840×2160, 30 fps the 8K series partly GPU only; 10-bit limit 240 at 8K.
- POCO F5 Pro: 10-bit is forbidden (the firmware breaks in this mode), 60 fps only up to 1920×1080.
- POCO X5 Pro: vendor camera mode with stabilization (the only one that works on all cameras); 60 fps up to 2560×1440 (the 778G processor cannot handle 60 at full resolution); 10-bit limit 240 at 3840×2160.
- POCO M4 Pro 5G: vendor modes at 31…60 fps and with stabilization; 60 up to 2560×1440.
Xiaomi 12, 12X, 12 Pro, 12S, 12S Pro, 12S Ultra, 12T Pro, 12 Lite
- Xiaomi 12 family (by model name or by firmware version): zoom on camera 4 from 0.5×, buttons 0.5×, 1×, 1.5×, 2×, 5× (on the 12S Pro 0.7×, 1×, 2×, 5×). Vendor camera modes per camera: on the main camera one with stabilization, another at frame rates above 30 or in 10-bit, a third with frames larger than 4096×3072; camera 4 has its own set. HDR10 on Qualcomm is turned on by the vendor mode "HDR10 Pro".
- 12 / 12X: 60 fps on the main camera the 8K series (on the 12X without 7680) and up to 4096×3072, the same on camera 4, camera 1 up to 3264×2448, cameras 2 and 3 up to 4080×3072; 30 fps the 8K series; 10-bit limit on the 12 60 at 8K, on the 12X 480 at 8K.
- 12S Pro: 60 fps up to 4096×2304 on all cameras thanks to a vendor mode; 10-bit limit 480 at 8K.
- 12T Pro: 60 fps on the main camera up to 4096×3072 and 6016×3384 (the camera does not report these sizes itself); 50 also 5792×4344, 48 also 6016×4512; 30 fps the 8K series; 10-bit limit 480 at 8K. Model-specific vendor modes for 10-bit, stabilization and frame rates above 30.
- 12 Lite: 60 fps on cameras 0 and 1 up to 2592×1940 (the 778G does not give 60 at full resolution); 10-bit limit 240 at 4000×3000. Vendor modes above 60 fps and with stabilization.
- 12S Ultra: 10-bit is forbidden, HDR10 is off. 60 fps up to 4096×3072 on all cameras, 30 fps the 8K series, 120 fps 720p and 1080p without GPU on cameras 0 and 8. Above 60 fps visible camera 0 is opened as actual camera 8.
Xiaomi 13, 13 Pro, 13 Ultra, 13T, 13T Pro, Redmi K60 Ultra
- Cameras. Visible 0 is opened as the actual camera: 13 → 7, 13 Pro → 7 (above 60 fps), 13 Ultra → 8 (up to Android 14) or 10, 13T → 7, 13T Pro → 6. The vendor parameter "app module" is passed to the 13 Pro, 13 Ultra, 13 and 13T Pro.
- Session. 13: always one vendor mode up to 60 fps; the stabilization mode does not work at all. 13 Ultra: on cameras 0…4 with stabilization, a model-specific mode. 13T: model-specific modes with stabilization, in 10-bit and at frame rates above 30.
- Aperture. 13 Ultra: auto, f/1.9, f/4 through Xiaomi vendor parameters on cameras 0, 5, 6, 8, 10.
- 10-bit. 13T: 10-bit AVC with the High10 profile. 13T Pro: 10-bit only if the camera itself declares HLG10, HDR10 or Dolby Vision, otherwise the codec is switched to 8-bit. The 13 Ultra in 10-bit forcibly turns off digital stabilization.
- HDR on MediaTek (13T Pro) through a vendor parameter.
- Frame rates. 13 Pro and Redmi K70: 60 up to 4096×3072 on all cameras, 30 fps the 8K series, 10-bit limit 480 at 8K. 13: 60 up to 4096×3072 on cameras 0 and 7, 10-bit limit 60 at 4096×3072. 13 Ultra: 60 up to 4096×3072, 30 fps the 8K series, limit 480 at 8K. 13T Pro: 60 up to 4096×3072, 24 fps the 8K series on camera 6, limit 30 at 8K and 60 at 4096×3072. 13T: 60 up to 3840×2160, 24 fps the 8K series, limit 60 at 4096×3072.
- Zoom. Model-specific button sets per camera on the 13, 13 Pro and 13 Ultra (on the Ultra they depend on the Android version).
Xiaomi 14, 14 Pro, 14 Ultra, 14T Pro, Redmi K70, Redmi K70 Ultra
- Session. On the 14 and 14 Pro vendor camera modes are turned off: none of them worked on any camera. 14 Ultra: on cameras 0…5 with stabilization at 30 fps, one mode; camera 6 is always opened in the mode in which module switching works, and recording through the GPU is forcibly turned on for it. 14T Pro and K70: model-specific modes.
- Cameras. Visible 0 is opened as the actual camera: 14 → 2, 14T Pro → 6, Redmi K70 → 7. The 14 Ultra and 14 Pro have no substitution.
- Aperture. 14 Ultra on cameras 0 and 2 from f/1.63 to f/4, 14 Pro on cameras 0, 2, 5, 6, 8 from f/1.42 to f/4. It is enabled through a vendor camera client name, otherwise the firmware does not expose the aperture.
- 10-bit. 14, 14 Pro, 14 Ultra: 10-bit is allowed also when recording through the GPU. 8-bit Dolby is off. 14T Pro: 10-bit only with a camera profile, as on the 13T Pro.
- Frame rates. 14 / 14 Pro / 14 Ultra: 60 up to 4096×3072 on all cameras, 30 fps the 8K series on the main camera and camera 2 (on the Ultra also 3, 4, 5); 10-bit limit 60 at 8K; at 120 in 10-bit the phone freezes. 14T Pro: 60 up to 4096×3072, 24 fps up to 4096×3072 on camera 6; limit 30 at 8K, 60 at 4096×3072. 8K is not offered on the 14T Pro: it does not work in recording.
Xiaomi 15, 15 Pro, 15 Ultra, 15T Pro, 17 Ultra
- Session. Vendor modes on the 15, 15 Pro and 15 Ultra are turned off: enabling them broke everything.
- 10-bit. Allowed when recording through the GPU, 8-bit Dolby is off. 15T Pro: HDR on MediaTek through a vendor parameter.
- Frame rates. 15 / 15 Pro / 15 Ultra: 60 up to 4096×3072, on the 15 Ultra 60 fps also the 8K series on cameras 0, 2…5; 30 fps the 8K series; 10-bit limit 60 at 8K. 15T Pro: 60 up to 3840×2160, limit 60 at 4096×3072. The 17 Ultra has no table of its own.
- Cameras. Model-specific zoom button sets per camera; cameras 2, 5 (on the 15 Ultra 6) are not considered duplicates.
Xiaomi Mix Fold 3
- Visible 0 is opened as actual camera 10. One vendor mode up to 60 fps; the stabilization mode does not work.
- 60 fps up to 4096×3072 on cameras 0 and 10, up to 1920×1080 on 3 and 4; 30 fps the 8K series; 10-bit limit 60 at 8K.
POCO X6 Pro, X6, X7, X7 Pro, Redmi Note 13 Pro, Note 13 Pro 4G, Note 14 Pro 5G
- POCO X6 Pro: vendor modes with stabilization, 10-bit only with a camera profile, HDR on MediaTek up to Android 15 (on 16 the parameter has been removed). X7 Pro: the same, without the Android restriction.
- Frame rates. X6 Pro, X7, X7 Pro: 60 fps up to 3840×2160 on the main camera, 10-bit limit 60 at 3840×2160. X6: 60 up to 1920×1080, limit 30 at 4096×3072 and 60 at 1920×1080. Redmi Note 13 Pro: 60 up to 1920×1080 on cameras 0 and 1. Note 13 Pro 4G: 30 fps 2560×1440 and 1920×1440 beyond what is reported. Note 14 Pro 5G: 60 up to 1920×1080.
Redmi Note 5, Note 7, Note 8, Note 8T, Note 8 Pro, Note 9, Note 10, Note 11, Redmi 8, Mi A3, Mi Note 10, Mi Note 10 Lite
- Stabilization. Note 8T: on the main camera digital stabilization is forcibly available. On MediaTek (Note 8, 8T, Note 8 Pro) stabilization through a MediaTek vendor parameter.
- Noise reduction. On the Note 8 and 8T multi-frame noise reduction per model, as on the Mi 9.
- Session. The Redmi Note 7/8/9 family on stock firmware gets its own vendor mode with stabilization.
- Frame rates. Note 7 / Redmi 7: 60 fps only in auto up to 1600×1200 and 2688×1512 through the GPU. Redmi 8, Note 7 Pro, Note 8, 8T: 48, 50 and 60 without GPU 1920×1080, 1440×1080, 1600×1200, 2688×1512. The Note 8 Pro on MediaTek cannot do 60 fps. Note 9, Note 10, Redmi 5, Note 5, Mi A3: 60 fps up to 2592×1944 on the main camera, in auto 1920×1080. Note 11: 60 without GPU 1920×1080 and up to 1600×1200, 10-bit is off. Mi Note 10 / 10 Lite: 60 fps 1920×1080, 50 also 3008×1692 without GPU. Note 5: camera 2 is hidden. Mi A3: the default autofocus area is not cropped to 4K.
Black Shark 4
- A separate manufacturer; the rules "for all Xiaomi" do not apply, only the general Qualcomm rules.
- 10-bit on the whitelist. 60 fps up to 4000×3000 on the main camera and up to 2592×1940 on camera 1; 10-bit limit 480 at 4000×3000.
